S&A 110V CW-FL-3000BT Industrial Water Chiller for Cooling 3000W Fiber Laser NEW

Description

S&A CW-FL-3000BT Industrial Water Chiller for Cooling 3000W Fiber Laser, 3.67HP, AC 1P 220V, 60Hz
Description:
S&A compressor refrigeration industrial water chiller CWFL-3000 with dual temp control function is produced by Guangzhou Teyu Electromechanical Co., Ltd. Our brands"S&A" and "TEYU" have gained approval and trust from thousands of manufacturer at home and abroad which enables our product export rate maintained at over 60% in long-term.
S&A CWFL series chiller is special for cooling Raycus, IPG, Max, nLIGHT, trumpf, Rofin and SPI fiber laser.
CWFL-3000 chiller is special applied for cooling 3000W fiber laser which is able to cool the fiber laser and optic lense at the same time, multiple use for saving cost, space and manual move, quiteconvenient for the user.
S&A industrial water chillers are popular for its 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. With that 1 key solution, customers no longer need to worry about the water temperature adjustment of seasonal changes.
Features:
1. 8500W cooling capacity; optional environmental refrigerant;
2. ±1°Cprecisely temperature control; The temperature range of S&A chiller is 5°C to 35°C, the controllable lowest water temperature depends on the heat load of cooled machine and cooling capacity of chiller. However, S&A suggest the best running temp is 20°C to 30°C for the chiller.
3. The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions;
4. Dual temperature to satisfy different needs of fiber laser device and the lens;
5. With Ion adsorption filtrating and test functions conform to fiber laser device operating requirements;
6. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm;
7. The chiller supports the Modbus-485 communication protocol, which can realize the communication between the laser system and multiple chillers. It can mainly realize two functions: to monitor the working state of the chiller and modify the parameters of the chiller.
8. Multiple power specifications; CE, RoHS and REACH approval;
9. Long working life and easy operation;
10. Optional heater and water filter.
Specification
Model
CW-FL-3000BT
Voltage
AC 1P 220V
Frequency
60Hz
Current
6.8~30A
Compressor power
2.7KW    3.67HP
Refrigeration capacity
1706Btu/h+26136Btu/h     0.5KW+7.66KW    430Kcal/h+6586Kcal/h
Refrigerant
R-22/R-410a
Refrigerant charge
2100g
Precision
±0.1℃
Reducer
Capillary
Pump power
0.55 KW+0.75 KW
Tank capacity
6 L+34 L
Inlet and outlet
Rp1/2”+Rp1”
Max. pump lift
41M+55M
Max. pump flow
50 L/min+83 L/min
N.W
180 Kgs
G.W
230 Kgs
Dimension
102X65X117 cm (L X W X H)
Package dimension
111X85X140 cm (L X W X H)