Industrial Water Chiller 6L Small Water Cooling Equipment for Laser Engraving

Description

Description
Features:
Water chiller has a variety of settings and fault display functions.
Two working modes: constant temperature and intelligent temperature control.
Cooling water flow and high and low temperature alarm safety protection function.
Water chiller device has a brand-new compressor, a high-efficiency shell and tube condenser, and an evaporator combination, super cooling, power saving and durable.
It is mainly used to make the heat generated during the operation of the laser device pass through the refrigeration cycle in the compressor refrigeration system and finally transfer to the air.
Specification：
Villdomall
Your Best Online Business Partner
Industrial Water Chiller Small Water Cooling Equipment for Laser Engraving
Description
Features:
Water chiller has a variety of settings and fault display functions.
Two working modes: constant temperature and intelligent temperature control.
Cooling water flow and high and low temperature alarm safety protection function.
Water chiller device has a brand-new compressor, a high-efficiency shell and tube condenser, and an evaporator combination, super cooling, power saving and durable.
It is mainly used to make the heat generated during the operation of the laser device pass through the refrigeration cycle in the compressor refrigeration system and finally transfer to the air.
Specification：
Model: CW-5200 DG
Voltage: 110 V
Frequency: 60Hz
Current: 4.5 A ~ 6.5 A
Oil tank capacity: 6 L
Compressor power: 0.68 KW, 0.93 HP
Cooling capacity: 5186 Btu/h, 1.52 KW, 1307 Kcal/h
Refrigerant: R-22 / R-134a / R-410a
Refrigerant consumption: 12.3 oz / 350 g
Accuracy: ±32.54 ℉/ 0.3 ℃
Reducer: capillary
Pump power: 0.03 kW
Maximum flow: 10 l/min
Maximum pump lift: 11 yards / 10 meters
Inlet and outlet: external Φ 0.4/10 mm copper connector
Packing size: 28.3 x 17.3 x 24.4 inches / 720 x 440 x 620mm (length X width X height)
Protection: compressor over-current protection, flow alarm, over-temperature alarm
Installation:
Step 1: Open the package and check whether the machine is in good condition and whether the accessories are complete
Step 2: Unscrew the water injection port on the top of the machine and add cooling water
Step 3: Connect the outlet and inlet pipes according to the system situation
Step 4: Connect the power supply and turn on the power switch
Step 5: Check the water level of the water tank
Step 6: Adjust the parameters of the thermostat
Item Specifics
Brand
Villdomall
MPN
166155-vill
Product
Water Chiller
Temperature Control
±32.54℉/ 0.3℃
Intended Use/Discipline
Industrial
Model
CW-5200 DG
UPC
Does not apply
Condition
Brand New
Voltage
110 V
Frequency
60 HZ
Current
4.5 ~ 6.5 A
Oil tank capacity
6 L
Compressor power
0.68 KW, 0.93 HP
Cooling capacity
5186 Btu/h, 1.52 KW, 1307 Kcal/h
Refrigerant
R-22 / R-134 a / R-410 a
Refrigerant consumption
12.3 oz / 350 g
Reducer
capillary
Pump power
0.03 kW
Maximum flow
10 l/min
Maximum pump lift
11 yards / 10 meters
Inlet and outlet
external Φ0.4/10 mm copper connector
Packing size
28.3 x 17.3 X 24.4 inches
Payment
We accept PAYPAL payment only.
your order will be shipped out when your transaction status is clear.
Please do make sure your address is correct. We only ship to confirmed address.
Shipping
Please make sure your shipping address is correct before we sending your package out. Once your payment is completed, please inform us by Email or leave eBay note if the changes are needed before we send the product.
All items will be shipped via USPS, UPS or FedEx from our US warehouse.
Returns
We accept returns , please feel free to contact us immediately if you change your mind and need to cancel the order.
When you received your package, please check it was damaged during transit or not. If damaged please contact us, we will do our best to solve it for you in time. Please do not return or post items before obtaining instructions from us.
We ONLY accept returns with original package. Please make sure that product has NO man-made sabotage. We will require a clearly picture for the damaged part for verification. Used items will not be accepted for return.
Contact Us
If there any problem,please do not hesitate to contact us. We will try my best to solve it.
Our tenet is customer satisfaction. If you are dissatisfied for any problem,please inform us before you leave negative feedback. Thanks for your understanding and trust in our store.
Villdomall
Your Best Online Business Partner
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Hot Item
New List Item
eSun PLA Pro PLA + Black Solid Opaque 1.75mm Actual Diameter 0.02 mm 1 KG Spool
USD 28.99
eSun PLA + White Filament 1.75mm 1KG Spool with 3D Build Surface 3D Printer
USD 28.99
eSun PLA Plus PLA +Silk Gold Filament High Stability Precision 1.75mm 1KG Spool
USD 31.99
eSun PLA PLus PLA + Filament 1.75mm 1KG Spool for 3D Printers, Silk Silver
USD 31.99
eSUN Dryer Box of 3D Printer Filaments Wide Compatibility Keep Drying 3D Printin
USD 58.99
Help & Info
Payment Policy
Shipping Policy
Return Policy
FAQ
About Us
Industrial Water Chiller Small Water Cooling Equipment for Laser Engraving
Description
Features:
Water chiller has a variety of settings and fault display functions.
Two working modes: constant temperature and intelligent temperature control.
Cooling water flow and high and low temperature alarm safety protection function.
Water chiller device has a brand-new compressor, a high-efficiency shell and tube condenser, and an evaporator combination, super cooling, power saving and durable.
It is mainly used to make the heat generated during the operation of the laser device pass through the refrigeration cycle in the compressor refrigeration system and finally transfer to the air.
Specification：
Model: CW-5200 DG
Voltage: 110 V
Frequency: 60Hz
Current: 4.5 A ~ 6.5 A
Oil tank capacity: 6 L
Compressor power: 0.68 KW, 0.93 HP
Cooling capacity: 5186 Btu/h, 1.52 KW, 1307 Kcal/h
Refrigerant: R-22 / R-134a / R-410a
Refrigerant consumption: 12.3 oz / 350 g
Accuracy: ±32.54 ℉/ 0.3 ℃
Reducer: capillary
Pump power: 0.03 kW
Maximum flow: 10 l/min
Maximum pump lift: 11 yards / 10 meters
Inlet and outlet: external Φ 0.4/10 mm copper connector
Packing size: 28.3 x 17.3 x 24.4 inches / 720 x 440 x 620mm (length X width X height)
Protection: compressor over-current protection, flow alarm, over-temperature alarm
Installation:
Step 1: Open the package and check whether the machine is in good condition and whether the accessories are complete
Step 2: Unscrew the water injection port on the top of the machine and add cooling water
Step 3: Connect the outlet and inlet pipes according to the system situation
Step 4: Connect the power supply and turn on the power switch
Step 5: Check the water level of the water tank
Step 6: Adjust the parameters of the thermostat
Item Specifics
Brand :
Villdomall
MPN :
166155-vill
Product :
Water Chiller
Temperature Control :
±32.54℉/ 0.3℃
Intended Use/Discipline :
Industrial
Model :
CW-5200 DG
Condition :
Brand New
Voltage :
110 V
Frequency :
60 HZ
Current :
4.5 ~ 6.5 A
Oil tank capacity :
6 L
Compressor power :
0.68 KW, 0.93 HP
Cooling capacity :
5186 Btu/h, 1.52 KW, 1307 Kcal/h
Refrigerant :
R-22 / R-134 a / R-410 a
Refrigerant consumption :
12.3 oz / 350 g
Reducer :
capillary
Pump power :
0.03 kW
Maximum flow :
10 l/min
Maximum pump lift :
11 yards / 10 meters
Inlet and outlet :
external Φ0.4/10 mm copper connector
Packing size :
28.3 x 17.3 X 24.4 inches
Payment
We accept PAYPAL payment only.
your order will be shipped out when your transaction status is clear.
Please do make sure your address is correct. We only ship to confirmed address.
Shipping
Please make sure your shipping address is correct before we sending your package out. Once your payment is completed, please inform us by Email or leave eBay note if the changes are needed before we send the product.
All items will be shipped via USPS, UPS or FedEx from our US warehouse.
Returns
We accept returns , please feel free to contact us immediately if you change your mind and need to cancel the order.
When you received your package, please check it was damaged during transit or not. If damaged please contact us, we will do our best to solve it for you in time. Please do not return or post items before obtaining instructions from us.
We ONLY accept returns with original package. Please make sure that product has NO man-made sabotage. We will require a clearly picture for the damaged part for verification. Used items will not be accepted for return.
Contact Us
If there any problem,please do not hesitate to contact us. We will try my best to solve it.
Our tenet is customer satisfaction. If you are dissatisfied for any problem,please inform us before you leave negative feedback. Thanks for your understanding and trust in our store.
All rights reserved.